Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Galaxy 5000; Modbus Q1 Input Breaker status does not change state

    Issue:
    Modbus Q1 Input Breaker status does not change state

    Product line:
    NAM Galaxy 5000


    Environment:
    NAM Galaxy 5000


    Cause:
    Modbus Q1 Input Breaker status does not change state

    Resolution:
    The 66061 JBUS/Modbus manual was updated May 2018 to reflect the correct Modbus register for NAM Galaxy 5000 Q1 Breaker status.  The Q1 Modbus register is only monitored on EMEA Galaxy 5000/5500 UPSs.  For NAM Galaxy 5000 customer must monitor KA1 for Q1 Breaker status change.  EMEA UPSs can monitor the KA1 status as well but KA1 is optional on EMEA UPSs.
    From the 66061- JBUS/Modbus manual
     
    Status message   Status to 0 Status to 1 JBUS Word Bit
    Mains 1 input switch (Q1) in EMEA closed open 44 3
    Mains 1 backfeed (KA1 optional) closed open 44 6
    Converted to Modbus
    Status message   Status to 0 Status to 1 Modbus Bit
    Mains 1 input switch (Q1) in EMEA closed open 69 3
    Mains 1 backfeed (KA1 optional) closed open 69 6
     


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance