in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the ratio of current transformers in Schneider recloser and sectionaliser?

    As standard, inside switchgear tank is installed with 3 CTs for 3 phases current measurement. These CTs are with 2000:1 ratio for N, U, W, RL series. E series is integrated with CT of 1000:1 ratio

     However, the above ratio data is for information only. There is no access to CT circuits for customers to measure the secondary currents or use them for a third party device.

     Note that N series can be optionally installed with another 3 CT on the other side of the switchgear for customer’s use. These are called additional or extra CTs and the ratio can be requested from one of the following options at time of order
    800/400/1; 600/300/1; 400/200/1 and 200/100/1

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance