Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How do I configure Lexium 28 to auto enable ?

    It is possible to configure Lexium 28 for Automatic Enable in which the drive will Enable as soon as power has been applied.

    This will be true provide there are no errors preventing the drive from enabling.

    Start by assigning the first digital input as the Enable input, and configure the input to be a normally close type contact.
    Do this by adjusting parameter P2-10 to 0001.

    Next adjust parameter P2-68 for "Enable Power Stage Automatically if SON input is active" .
    Do this by setting P2-68 to 0001.

    Now power cycle the drive for the settings to be accepted.

    The drive will now automatically enable when the power is applied and no errors are present.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance