Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Set up Accutech BR21 base radio with Aout/Switch Module

    Accutech BR21 with AOUT/Switch Module set up

    Instructions:
    1.Connect the USB to RS485 Converter to the USB computer port.
    2.Connect the 2 wire RS485 connector to the A+ and B- terminal of the BR21 Base radio.
    3.Set the Dip switch 3 to RS485.
    4.Apply power to the BR21 Base radio.
    5.Connect the 2 wire RS485 green connector to the + - A B terminal of the Aout/Switch Module.
    6.Apply power to the Aout/Switch Module using the bottom terminal.
    7.Open Device manager, select Ports (COM & LPT) to verify the power created on the USB to RS485 Converter .
    8.Open Accutech Manager. Use User: admin and Password: password. Hit connect.
    9.At the bottom right corner of the computer screen, right click on the RF Manager service.
    10.Select Options.
    11.Enter the selected USB to RS485 Converter serial port.
    12.Right click on the RF Manager service.
    13.Then Restart the server.
    14.Finish

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance