Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: Workaround for Locked Arithmetic Modules in ION Setup

    A user would like to edit the modules in ION Setup, but display the error 'Attempt to access Hardware Locked Module denied' when attempting to modify the module.

    Product Line
    ION8650, ION8600
    ION7650, ION7600, ION7550, ION7500, ION7400, ION7300 series
    ION8800, ION7700

    ION Setup 3.0
    Advanced Mode Modules

    Modules can become hardware locked on ION meters

    The follow example can be applied to all modules in Advanced Mode. This example uses the Arithmetic Module. See ION Reference for detailed descriptions of the ION Modules.

    Follow the steps below for a workaround to create an arithmetic module to modify:
    1. Login to ION Setup

    2. Under setup screens in ION Setup enter advanced mode. While holding the CTRL key, click on the device (left hand side of the screen) > all the modules in the advanced mode should appear
    3. Navigate to the Arithmetic Module folder
    4. Right-click in the folder (on the right hand side) then while holding the CTRL key, click on Insert Module

    5. Enter unit password, a Create Modules window opens
    6. Check mark an available Arithmetic Module, then click Create.

    7. Arithmetic Module (with an X going across it) will appear in the list
    8. Double-click on the new module to edit/modify the parameters.

    NOTE: Suggested to start from the highest module and create modules until you reach one you can edit. There are multiple reasons about how a module can become locked and you will not be able to edit them. This way you can choose a module to create and have a higher chance of being able to edit/modify the module. Please refer to ION Device Template Reference for more information regarding Module Count and Locked Modules.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance