Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    "Invalid security access for RMP" error in offline mode of ION Setup.

    Issue 
    When trying to add firmware to a meter in the offline mode of ION Setup an error appears stating, "Invalid security access for RMP."

    Product Line 
    ION Setup 3.0

    Environment 
    ION Setup Offline Mode

    Cause 
    Customer may want to send an offline meter new firmware templates. 

    Resolution
    Software engineers are currently working on this issue. The following is a workaround. 

    1. Connect to the offline meter in ION Setup
    2. Open Setup Assistant and select Template 
    3. Select the "Send to Meter" tab
    4. Hold down key.
    5. While holding down key, left-click Send.
    6. The following dialog should appear. 

    7. Click on Yes to proceed. 
    8. Select the firmware and template to load onto the meter

    This will be slightly slower than a normal template paste, but hardly noticeable. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance