Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the Alternate source sense feature in PM1130H meter ?

    Alternate source sense terminals detect the status of alternate power sources.
    Source 1 in the meter connects to utility and Source 2 connects to alternate
    source. The two terminals are connected with a 1Ph LN alternate power source.
    When Source 2 is turned on, voltage flows through the meter and the system is
    powered with alternate source.
    The meter measures energy accumulation and run hours on the alternate source.
    The total energy used by the meter is the sum of accumulated energy for Source 1
    and Source 2. Total run hours of the meter is the sum of run hours of Source 1 and
    Source 2. Total accumulated energy, and run hours can be viewed through meter
    display, and through communication.

    NOTE: Old accumulated energy and run hours can be viewed through display and
    communication for Source 1 and Source 2.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance