in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    M580 Communication Security settings

    Title
    M580 Communication Security settings
     
    Issue
    M580 Communication Security settings
     
    Product Line
    M580
     
    Environment
    Unity Pro
     
    Cause
    N/A
     
    Resolution
     In the Unity progarm for a M580, the user has the ability to enable/disable Ethernet services on the Security tab.
    The User can enable/disable FTP, TFTP, HTTP, EIP, SNMP, and DHCP/BOOTP for all IP addresses.
    – or –
    The User can Enable/disable FTP, TFTP, HTTP, Port 502, EIP, and SNMP for each authorized IP address.
    The authorized IP addresses use the Access Control area to restrict device access to the CPU in its role as a server.
    After you enable access control in the Security dialog, you can add the IP addresses of the devices that you want to communicate with the CPU to the list of Authorized Addresses:
    By default, the IP address of the CPU’s embedded Ethernet I/O scanner service with Subnet set to Yes allows any device in the subnet to communicate with the CPU through EtherNet/IP or Modbus TCP.
    Add the IP address of any client device that may send a request to the CPU’s Ethernet I/O scanner service, which, in this case, acts as a Modbus TCP or EtherNet/IP server.
    Add the IP address of your maintenance PC to communicate with the PAC through the CPU’s Ethernet I/O scanner service via Unity Pro to configure and diagnose your application.

    NOTE: The subnet in the IP Address column can be the subnet itself or any IP address inside the subnet. If you select Yes for a subnet that does not have a subnet mask, a pop-up window states that the screen cannot be validated because of a detected error.
    You can enter a maximum of 127 authorized IP addresses or subnets.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance