Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set the IDA magnetizing currents on the ATV930 drive?

    Issue:
    How do you set the IDA magnetizing currents on the ATV930 drive?

    Product Line:
    Altivar ATV930 drive

    Environment:
    All 

    Cause:
    Auto tune

    Resolution:
     
       

    Yes IDA is set by AUTO TUNING.

    This why it is important to enter very well the name plate of the motor.

    It means that the on ATV9xx, the motor nameplate configured in the drive is very important to have good performance
    .
    If IDA is to high you can always reduce this parameter after the auto tuning.

    What happens when IDA is too high.

    The voltage on the motor will be too high and then also the current Inside the motor. The temperature will also increase.

    What happens when IDA is too low.

    No torque on the motor.

     
       

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance