Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    PM55xx meters now supports Ethernet/IP communication protocol

    Customer is asking if PM5500 meter supports Ethernet/IP

    Product Line
    PM5560 (METSEPM5560)
    PM5563 (METSEPM5563)

    Communication protocol support

    PM55xx meters does support EtherNet/IP communication protocol starting with Firmware 2.5.2 that was released on Feb 2018. Meters with older version of firmware need to be upgraded to version 2.5.2 to support Ethernet/IP protocol.

    PM55xx Firmware Version 2.5.2 can be downloaded from here

    EtherNet/IP features overview:
    The CIP (Common Industrial Protocol) application layer defines a set of application objects and device profiles that define common interfaces and behaviors. In addition, CIP communication services enable end-to-end communication between devices on the different CIP networks. EtherNet/IP maps the CIP communication services to Ethernet and TCP/IP, enabling multi-vendor interoperability between devices on Ethernet as well as with the other CIP networks. 

    EtherNet/IP defines two primary types of communications:
    •    Cyclical Exchanges (Implicit Exchanges)
    •    Messaging (Explicit Exchanges)

    EtherNet/IP is enabled by default on firmware v2.5.2. This feature can be enabled/disabled by navigating to the EtherNet/IP settings available through the meter’s display under Maint > Setup > Comm, or via the relevant section in the meter’s web-page interface.

    For more details on the EtherNet/IP features in PM5500 Series, please refer to the PM5500 Series User Guide version 05 or later.

    More information:
    You may find firmware, user manual, installation guides, and other documentation on the Schneider Electric Shopping Kiosk, or the Schneider Electric Web Site.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance