Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to set up an ATV320 with terminals as run command and 0-10VDC reference from AI1?

    Issue:
    How to set an ATV320 with terminals as run command and 0-10VDC reference from AI1?

    Product Line:
    Altivar 320

    Environment:
    All

    Cause:
    Programing

    Resolution:
    Wiring: 
    DI1 and +24V as 2 wire control run command.

    0-10VDC can be wired into AI1 and COM.
    If using a potentiometer then wiring would look like +10, Ai1, and COM.

    Drive is already programmed to do this function from the factory.
    Under CONF, FULL, I/O, TCC will need to be set to 2C.
    Under CONF, FULL, CTL, FR1 will need to be set to AI1

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance