Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to modify the default PC-based logging for an ION6200 when it is communicating over Modbus or ION protocol?

    The ION6200 is not capable of onboard logging. Therefore, the customer would like to know how to modify the default PC-based logging for the ION6200 in Power Monitoring Expert.

    Product Line

    Power Monitoring Expert 8.x

    The ION6200 does not contain onboard data logs. Therefore, all logging is specified in the device driver regardless of the protocol being used.

    *Warning: Take backups of any files prior to modifying them. Ensure the backups are in a location that will not be overwritten (i.e. the Desktop).
    1. Open Management Console
    2. Select Tools > System > Modbus Device Importer 
    1. In the Modbus Device Importer, select File > Open
    2. Navigate to \Power Monitoring Expert\system\translators
    3. Open the file, 6200.ion 
    4. Select Configure Logging and Calculation 
    1. Make the desired modifications
    2. Click OK 
    3. Select File > Save 
    4. Select Tools > Update Device Type 
    5. Exit the Modbus Device Importer 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance