Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is an OHF Fault on an ATV312?

    What is an OHF Fault on an ATV312?

    Product :


    Overheat, high temperature
    Drive temperature too high

    OHF is an overheating fault.  This may be due to excessive ambient temperature or the drive operating a large motor load over  a long period of time.  The tripping threshold is when the drive thermal state (THD) reaches 118%.  This cannot be disabled or changed. 

    Check the ambient temperature around the drive.  They are intended to work in ambient ratings of 40C (104F)
    Check that the internal fans are running
    Check the motor load, that the motor is sized equal to or less than the drive rating. 
    All the drive and motor some time to cool down in high temperature conditions.
    If the fans work, the ambient temperature is within range, the termperate sensor, control section or powerboard could be inoperative in which case the drive would need to be replaced.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance