in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to take the Galaxy 5000 UPS from total power off to normal operation.

    Issue:
    Transitioning the Galaxy 5000 UPS from total power off to normal on-line operation.
     
    Product line:
    Galaxy 5000, Galaxy 5500
     
    Environment:
    All models, all serial numbers
     
    Cause:
    For various reasons, the Galaxy 5000 may be in a totally off state.  This guide illustrates how to restore it to normal operation.
     
    Note: This is not for commissioning a new UPS.  The commissioning of a new UPS must be performed by a Schneider Electric trained and qualified service representative.
     
    Resolution:
    How to restore the Galaxy 5000 UPS from total power off to normal operation.  This procedure is for a single UPS without an external bypass panel.
     
    These instructions are in the owner’s manual which can be located at http://www.apc.com/salestools/MBPN-8YPFLA/MBPN-8YPFLA_R0_EN.pdf
     
    Step 1: Set the input Q1 switch to On
    Step 2: Wait until the end of the UPS initialization with PFC start-up.
    Step 2: Push the Menu Button
    Step 3: Scroll to “Maintenance”
    Step 4: Choose “Start the UPS”
    Step 5: Turn the Q4S Switch to On
    Step 6: Turn the output switch Q5N to On
    Step 7: Turn the maintenance bypass switch Q3BP to Off
    Step 8: Set the battery circuit breaker(s) QF1 to the On Position.
    Step 9: Press the Green “Inverter Start Button”
    The Inverter Assumes the load, and the UPS is normal operation with the load protected.
     
    Caution: Never remove any covers or panels.  There are no user serviceable parts inside.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance