Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the default IP address of ScadaPack controller ?

    Default IP of SCADAPack controller is 0.0.0.0, means there is no default configured IP till version 8.12.16. The user must create and download IP settings by configuring them using E-configurator tool through USB or Serial Cable. Following are normally the default serial port settings.

    Port Mode: RS232
    Port Baud Rate: 9600
    Port Data Mode: 8-bit No Parity

    Refer to hardware manual of the relevant controller for more details and port settings.


     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance