Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Data Publication Over a GPRS Modem on a Com'X 200

    A GPRS modem with a SIM card must be plugged to the Com’X 200 for GPRS communication. The
    modem LED flashes every 5 seconds if correctly detected.

    Follow this procedure to configure your GPRS:
    1 - Click the Communication settings main tab.
    2 - Click the Network settings subtab.
    3 - Click GPRS only in the Network configuration dropdown list.
    4 - Type the APN provided with the SIM card.
    5 - Type the username, password, and PIN code if provided by the operator.
    6 - Click Save changes.
    7 - Check if the GPRS modem is activated.

    The modem LED shall be static with a color that depends on the GPRS signal level as shown below:
    NO LED: No modem detected
    YELLOW (fast repeated flash): Modem detected
    YELLOW (slow repeated flash): Modem not connected to a network
    RED (constant): Weak signal level 
    YELLOW (constant): Medium signal level
    GREEN (constant): High signal level

    Check the status of the GPRS modem and signal level on the banner.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance