Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to clear a latched alarm on an Smart ATS

    Issue:
    How to clear a latched alarm on an ATS
     
    Product line:
    APC ISX-ATS-GEN, SmartGen ATS
     
    Environment:
    All Product models, all serial numbers
     
    Cause:
    How to clear a latched alarm on an ATS

    Resolution:
    Go through the steps for clearing latched alarms on an APC ATS via the display:
     
    1. Select ‘Alarms’ from the main menu
    2. Select ‘Alarm/Event Log’ from the Alarms menu
    3. Select ‘Clear Latched Alarms’

    You can also clear alarms by resetting the automatic operation on the ATS:
    1. Locate the Automatic Operation Switch on the ATS and turn it to Disable. 
    2. When the "Not in Automatic Operation" light illuminates, turn it back to Enable. The orange LED will be extinguished.

    The following video demonstrates these procedures:
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance