Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    NetBotz Rack Monitor 250 Modbus Register Map Detail for MM_SENSOR_1_DISCRETE_STATE register/data point

    Issue

    The NetBotz 250 Modbus Register Map references this FAQ article to further explain the possible responses/ENUM for the following register/data point:
    • MM_SENSOR_1_DISCRETE_STATE

    Product Line
    • NetBotz
      • ​NetBotz Rack Monitor 250


    Environment
    • All serial numbers
    • All firmware versions
    • Modbus TCP/serial users

    Cause

    This article will provide additional information and detail for Modbus users.


    Resolution

    Within the NetBotz 250 Register Map, discrete (state) sensors refer back to MM_SENSOR_1_DISCRETE_STATE as needed to provide what possible responses may exist. Modbus responses of 1 and 0 may refer to different discrete sensor states depending on sensor type. The below information clarifies what is mentioned in the NetBotz 250 Register Map document.

    MM_SENSOR_1_DISCRETE_STATE 

    The following responses are supported for MM_SENSOR_1_DISCRETE_STATE:
    • 0 = Open (Low)
    • 1 = Closed (High)
    • 2 = Not Connected

    The above possible responses will also be used by the following supported sensor types for MM_SENSOR_1_DISCRETE_STATE:
    • Smoke (NBES0307) - 0 = No Smoke, 1 = Smoke Detected, 2 = Not Connected
    • Fluid (NBES0301) - 0 = No fluid, 1 = Fluid Fetected, 2 = Not Connected
    • Vibration (NBES0306) - 0 = No Vibration, 1 = Vibration Detected, 2 = Not Connected

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance