in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to Run a Manual Self-test on your Symmetra PX10-80KVA UPS

    How to Run a Manual Self-test on your Symmetra PX10-80KVA UPS
    Product line:
    Symmetra PX1
    All Product models, all serial numbers
    At times it is necessary to perform a battery system test outside normally scheduled intervals
    Select "Control" from the main Menu
    Select "Do Self Test" and hit enter

    Confirm the option by selecting Yes and hitting enter (The test will run for 1 minute)
    You can monitor the status of the batteries while the test is running by Hitting Escape to get back to the main menu

    Select "Status" from the main menu
    Scroll down the list to Battery Voltage.

    Make a note of the Actual Battery Voltage and How low it goes during the test. When the test is completed this number will start climbing. Value should be as close to 192v as possible. Lower values indicate the batteries are getting weak.

    The following video demonstrates this procedure:

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance