Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Read Only Mode- Online editing not available when IEC enabled on Momentum Wages A8

    Issue
    Read Only Mode- Online editing not available when IEC enabled error  when changing the modbus serial id.

    Product Line
    Momentum Wages Devices

    Environment
    Using PortCon to change the modbus serial id

    Cause
    IEC upload information was not checked in Concept when the project was uploaded or was loaded with Concept 2.5 or lower. 

    Resolution
    The original project needs to be reuploaded to the device. Reloading the project is the only way to do this since the project was uploaded locked. 
    The  procedure to upload the original project can be performed using the DEVCON user guide in FA221550  on page 12
    On page 13 before starting Procedure 2, Go to Project -> Code Generation Options -> Check Include IEC upload information. This will allow the communications information to be changed in the future on the device. 
    Continue the process to the end of Chapter 5 on page 22. 
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance