Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to program a 753SSR sensor

    Objective:
    This video shows the different options available to the installer or user when using a 753SSR sensor. It goes through explaining how to set on timers, as well as how to set what light level for it to switch.

    Product Line
    Clipsal Occupancy Sensors

    Environment:

    Resolution:
    Lux Level Setting: This potentiometer determines the light level required for the sensor to detect below before the light is switched on after detecting motion. This setting can be set anywhere between 2 - 2000 Lux.

    Time Setting: This potentiometer sets how long the sensor should time for once it turns the light on. This setting can be set anywhere from 5 seconds to 15 minutes.

    Manual Override Switch: This is triggered when power is switched from off to on, off again, then on. This will tell the sensor to leave the light on for 4 hours, which once the timer expires, will set the sensor back to normal operation. To leave override mode, switch the sensor off and on.

    Teach Mode: When the sensor is at the light level that you wish for it to turn the light on, set the Lux Level Setting to the arrow symbol. After 10 seconds, the value measured will be saved as the threshold.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance