in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: Program “Absence Detection” using Classic Configuration

    Objective:
    Absence detection sets the sensor to detect the absence of motion. If the lighting is on and the sensor detects the absence of motion, a timer is activated. When the timer expires and the sensor element still detects absence, a C-Bus command is sent to control lighting.
    This video will step through Program “Absence Detection” using Classic Configuration, it this will cover those C-Bus sensors, 5753L, 5753PEIRL, 5754ODPE, 5754ODPEIR.
    Product Line:
    C-Bus Sensors: 5753L, 5753PEIRL, 5754ODPE, 5754ODPEIR
    Environment:
    C-Bus Toolkit 1.15.2
    Resolution:
    Right click on the sensor and select “Open Unit in Classic” to open its GUI in Classic
    Select a group from the “Virtual Key 1 Group” dropdown list
    Click the  button to define the Expiry Time (5 minutes assigned by default) and click “OK”
    Go to Key Functions tab and change the Short Press “On Key” on Key 2 column to “Idle”
    A Confirm-12413 message will pop up
    Click “NO” to keep the Occupancy events for this sensor
    Click “Apply” or “OK”
     
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance