Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ION 6200: Disable hardware lock on the meter

    Issue
    Disabling the hardware lock on the ION 6200 meter.

    Product Line
    PowerLogic ION 6200 meter

    Environment
    Intermediate Metering

    Cause
    Requires configuration of some parameters that is not permitted when hardware lock on the meter is enabled.
     
    Resolution 

    1. Disconnect the meter's control power.

    2. Place the hardware locking jumper as shown below.
    (Note: If the meter's hardware locking jumper has been misplaced, a paper clip may be used instead. Ensure that the paper clip is jumpering the diagonal pins as shown in Figure 2).

    3. Restore the control power with the hardware lock jumper inserted to for the hardware lock to be disabled.

    Figure 1


    Figure 2


    A revenue meter is “hardware locked” when the hardware locking jumper is not applied at meter power up. (A revenue meter is “hardware unlocked” when the jumper is applied on meter power up).

    Configurable Parameters for the hardware-unlocked Revenue Meter
    Hardware unlocked revenue meters allow you to configure all of the setup
    parameters and perform Demand Resets including an Energy Demand reset.

    Configurable Parameters for the hardware-locked Revenue Meter
    Hardware locked revenue meters allow you to:
    • configure the communication parameters
    • configure the communication scaling
    • configure the display update parameters
    • configure the password
    • perform a Peak Current Demand reset
    • perform Peak Power Demand rese

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance