Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to program an ATV630 to follow AI3 analog input for mA or DC signal?

    Issue:
    How to program an ATV630 to follow AI3 analog input for mA or DC signal?

    Product Line:
    Altivar 630, process

    Environment:
    All

    Cause:
    Programming, installation

    Resolution:
    AI3 can be configured for both DC scale or mA.
    To perform this go into Complete Settings, Inputs/outputs, and AI/AQ tab, AI3 configuration.
    Set AI3 type according (DC, mA, PTC man, Kty, Pt1000, etc.)
    Set AI3 min type as 4 mA if needed.
    Set AI3 max value as needed.

    To allow the drive to look at AI3 as a speed refererence:

    Go into Complete settings, Command and Reference, assign Reg Freq 1 Config AI3.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance