Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How much memory does the PM8000 series have and what it is used for?

    Issue
    How much memory does the PM8000 series have and what it is used for?

    Product Line
    PM8000 series 

    Environment
    PM8000 on-board memory
    PM8000 data log

    Cause
    Default memory and logging framework for the PM8000 series meter.

    Resolution
    The 8000 series has 512 MB of memory which is used by the firmware and ION framework.  This 512 MB of memory is not configurable by the end user, however.  The user only has access to manage the logging memory, which is 10 MB in size, and the FTP site memory.  More information on the FTP site memory can be found in article FA317553  ION Setup can configure how the on-board logging memory is allocated through the Setup Assistant.



    PM8000 series meter default logging framework that is configured to record data and events at pre-defined intervals or conditions:
    Data Recorder number Log name Depth Interval
    1 Revenue Log 3360 (35 days) 900 seconds (15 minutes)
    9 Loss Log 3360 (35 days) 900 seconds (15 minutes)
    2, 3, 4 Historic Logs 3360 (35 days) 900 seconds (15 minutes)
    39 Daily Nominal Logs 450 Triggered on Demand
    7, 8 Harmonics Logs 840 (35 days) 3600 seconds (1 hour)
    N/A Waveform recorders (6 total) 30 Triggered on Demand
    N/A COMTRADE records 10 Triggered by waveform recording (if COMTRADE logging is enabled
    10 Energy/Demand (EgyDmd Log) 3360 (35 days) 900 seconds (15 minutes)
    5 Sag/Swell Log 100 Triggered on Demand
    N/A Event Log 500 Triggered on Demand
    11, 12, 17, 19 - 26, 28, 29, 32, 35 EN50160 Logs varies EN50160 Interval
    6, 16, 37, 38, 40 4-30 Logs varies IEC61000-4-30 interval

    The PM8000 series meter can support up to 50 data logs (data recorders) which can each record up to 16 different parameters.

    The latest version of ION Setup can be downloaded from the link below.
    Where can I download the latest version of ION Setup software?

    PM8000 frequently asked questions: FA244498

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance