Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can I connect XBTN401/410 to my PC using Vijeo Deisgner Lite?

    There are two ways to connect the panels to your PC.
    ​Firstly, you can use the XBTZ915 cable connecting to the computer with a physical serial port.
    Secondly, the USB adaptor should be applied if your computer does not have a physical serial port. The part number for the cable combination is TSXCUSB485 position 0: TER MULTI  +  XBTZ925(B). The connection is based on Uni-Telway protocol, position 0: TER MULTI must be set on the adapter. To test the communication for Uni-Telway driver, go to the driver manager to configure and test. Please refer to the following link for the configuration training video:
    https://www.youtube.com/watch?v=cFP6XsokZGU
    If the Uni-Telway driver has been configured and tested properly, you will be able to upload/download the programs from Vijeo Designer Lite.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance