Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    On the replacement NetShelter CX fan tray the center pin of the DC connector has a larger o.d.

    Issue: 
    Will the original power supply fit onto the DC connector on the replacement fan tray? 

    Product Line: 
    NetShelter CX

    Environment: 
    All models, all serial numbers. 

    Cause: 
    When comparing the replacement fan unit (0M-10446) to the original the replacement has a fan switch, and the DC power connector on the fan appears to be different. 

    Resolution

    Yes, the power supply from the original fan will fit onto the replacement fan unit. They are compatible. 
    Also, the fan unit was upgraded to include a booster switch. Depending on the age of the NetShelter CX the fan tray may not have the booster switch. At the low speed setting the fan operates as the original fan unit did. 
    The document attached below shows photos of the fan booster switch, and DC power connectors on both the older and newer fan units. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance