Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the replacement for a Invensys Actuator MF-63123?

    The replacement part for the MF-63123 Will be dependent on the Valve size. Please see the Below Table:
     
    Part Number To Be Replaced Description Replacement Forta Actuator Required Linkage
        VB-7xxx 1/2" to 1-1/4" VB-7XXX 1-1/2" to 2" Except VB-7323 VB-7323 1-1/2" to 2"  
    MF-63103 Floating M800A M1500A M800A AV-811
    MF-63103-500 Floating with auxiliary switch M800A-S2* M1500A-S2* M800A-S2* AV-811
    MF-63123 Floating with 15K feedback pot M800A** M1500A** M800A** AV-811
    MF-63123-401 4 to 20mA 7/16", DA M800A M1500A M800A AV-811
    MF-63123-402 4 to 20mA 7/16", DA M800A M1500A M800A AV-811
    MF-63123-500 Floating, 15K feedback pot & aux switch M800A-S2** M1500A-S2** M800A-S2** AV-811
    MF-63123 & MFC-420**** MF-63123 with mA input card M800A M1500A M800A AV-811
    MF-63123 & MFC-8000**** MF-63123 with Vdc input card M800A M1500A M800A AV-811
    MF-63123-500 & MFC-420 **** MF-63123-500 with mA input card M800A-S2* M1500A-S2* M800A-S2* AV-811
    MF-63123-500 & MFC-8000 **** MF-63123-500 with Vdc input card M800A-S2* M1500A-S2* M800A-S2* AV-811

    * Check electrical rating of switch, Forta Switches are not adjustable
    **Old 15K feedback potentiometer, Forta 2 to 10Vdc feedback standard on all models
    ***Check Check electrical rating of switch, Forta Switches are not adjustable, old had15K feedback potentiometer, Forta 2 to 10Vdc feedback standard on all models
    ****MFC-420 and MFC-8000 had adjustable start point and span, Forta has sequencing options

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance