Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can I upload and save the project file from the Twido PLC?

    To transfer a project file from the Twido PLC to the PC, you need the following:

    The Twido PLC powered on,
    The communication cable TSXCUSB485 + TSXCRJMD25 (USB to RJ45 to RJ45 to minidin8) and the programming software TwidoSuite. 
    Run the TwidoSuite and choose "Programming" mode
    from the "Project" tab, click "Open an existing project" 
    Check "From Controller",
    Then click "Load".
    The TwidoSuite will then jump to the "Select connection" page, choose your com port and click "OK".
    Then the program existed in the controller will be transferred to the PC. To save the project, you need to disconnect the PC from the PLC first. After this is done, the "Save current project" selection should be available from the "Project" tab. Finally, select the location and file type to save your project. 

    NOTE: Twido is obsolete and the recommended replacement would be the M221 with Somachine Basic and can import the Twido program.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance