Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to find the status of a PME redundant system in XenCenter

    Issue
    What command gives information about the status of a PME system installed on redundant servers using everRun from Stratus Technologies (Marathon).  The information indicates which server is the master and whether both servers are online or not.

    Product Line
    everRun, XenCenter, eAC
    Power Monitoring Expert (PME)

    Environment
    XenCenter

    Cause
    A power monitoring system, PME, is installed on two servers to account for redundancy.  For some reason the redundancy is not working; for example one of the servers could have gone offline.

    Resolution
    *Warning: Installation and maintenance of XenCenter should only be performed by qualified, competent personnel that have appropriate training and experience. Failure to follow the instructions will result in permanent damage to the system.

    1. Open XenCenter
    2. Go to 'Console' tab
    3. At the prompt, type ev host-list and press 'Enter' to run the command


    Below is an example:

    [root@ION2 log]# ev host-list
                        uuid ( RO): 3a138ced-f569-4f6f-b3fe-c61eaf41c0a5
                     enabled ( RO): true
                     host-ip ( RO): 100.100.200.230
                   host-name ( RO): ION1
                   host-role ( RO): Slave
            name-description ( RO): Default install of XenServer
                  name-label ( RO): ION1
                      online ( RO): false
                         url ( RO): http://100.100.200.230:8080

                        uuid ( RO): 9095bd38-ca71-44df-839b-04bb07ab0613
                     enabled ( RO): true
                     host-ip ( RO): 100.100.200.231
                   host-name ( RO): ION2
                   host-role ( RO): Master
            name-description ( RO): Default install of XenServer
                  name-label ( RO): ION2
                      online ( RO): true
                         url ( RO): http://100.100.200.231:8080

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance