in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the InF9 Fault on the Altivar Process Drive?

    Issue:
    What is the InF9 Fault on the Altivar Process Drive?

    Product Line:
    Altivar Process Drive (ATV630, ATV930, ATV650, ATV950, ATV660, ATV960, ATV680, ATV980)

    Environment:
    All serial numbers for Altivar Process Drive

    Cause:
    N/A

    Resolution:
    Principle
    The fault indicates that the current measurement are not correct

    Probable Cause
    • Bad Current Circuit/Sensors
    • Bad Control/Power Board
    Remedies
    • For customers who are not familiar with the drive please contact your local Schneider Electric Representative.
    • If those who are more familiar with the Altivar Process drive you can follow procedures below:
      • Check ribbon cable between control board and power board
      • Swap power board or control board
      • Change out current sensors
      • Replace/repair complete drive

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance