Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to reset Peak Power Demand values from the front display of CM4000

    Product Line
    CM4000 series

    Keys on the front display.

    To reset the accumulated Peak Power Demand values, follow the procedures below:

    1. From the Front Panel Main Menu, select Resets
    2. Select Demand. The password prompt displays.
    3. Select your password. The default password is 0.
    4. The Reset Demand Screen displays. Select the value that you need to reset. 
    5. Press Enter on the selected option. The "No" option starts to blink
    6. Use the Up arrow to change to "Yes", then press Enter. The "Yes" will stopp blinking
    7. Press the Menu button. You will get a confirmation that the Reset was complete. 
    8. Press the Menu button two more times to return to the Main Menu Screen

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance