Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Upgrade CPU in RTU Configuration?

    Issue: I have SCADAPack configurations for SCADAPack 333E RTU and now I want to upgrade to SCADAPack 535E. Is it as simple as open the existing *.RTU file with SCADA Pack E Configurator and then choosing “View>Change RTU Type”?

    Every SCADAPack has some default configuration which is related to communication, Hardware IO cards, and physical ports. Once user select Change RTU Type from main menu "View" of SCADA Pack E Configurator, the user gets a prompt "The Current RTU Type will be changed. Apply all the SCADAPack *Target SCADAPack Model* default configurations?"
    The user should select "Yes". If selected No, default hardware will remain unchanged.

    For Example SCADAPack 535E has 6601 IO Module with it and other SCADAPack may have different IO Card. If user selects NO, these I/O modules will not be changed. If selected YES, these will be changed as per SCADAPack CPU Type. 
    There is another aspect which must be taken care of; SCADAPack ports. There are different number of serial ports and ethernet ports for echy type of RTU. Once you change the type of RTU, please have a careful look at IO configuration and port configurations.

    Best practicec is to keep the backup of original configurations, make changes in the configurations (change RTU Type) and then open both configurations in parallel and review every section. Although, most of the stuff will be done by SCADAPack E Configurator but user muct take care of IO modules and Ports configurations.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance