Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to set up load assist on a Uniflair unit

    Issue:
    How to set up load assist on a Uniflair unit.
     
    Product line:
    Uniflair Gen 1 and Chilled Water Units
     
    Environment:
    Uniflair units with push button displays and all Uniflair Chilled Water Units
     
    Cause:
    Install, Repair, Maintenance
     
    Resolution:
    These are the instructions on how to set up a Uniflair unit to turn on for load assist. Load assist in a Uniflair united is referred to as Sleep Mode. We need to make the proper adjustments to make the unit come on as needed. This operation will only work with two or more units and they must be grouped together.
     

     
    Press PRG on the display
     
    Press ENTER on Setting Menu
     
    If asked for a pass code 0000 and then ENTER
     
    Press ENTER on Operative Settings
     
    Press the ARROW unit you get to Sleep Mode Settings
     
    Press ENTER to change it from N to Y
     
    Press ENTER to set Min Temp
    (This is the temp you want the load assist to stop)
     
    Press the ARROW to change Temp
     
    Press ENTER to move to Max Temp
    (This is the temp you want the unit to turn on and help)
     
    Press the ARROW to change Temp
     
    Do the same for Humidity settings
     
    Then press ENTER to go to Fan Cyclical Start
     
    Use the ARROWS to change to Y
     
    Now you have a new line for Cycle Time Min
    (This allows the fans to run to keep the air moving after temp or humidity has activated load assist)
     
    Press ENTER to get to the top of the Screen

    Press ESC till you get back to the main menu

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance