Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is there a driver available for the PM5000 series meter on ION Enterprise 5.6 SP2?

    Issue
    PM5000 series driver for ION Enterprise 5.6 SP2

    Product Line
    PM5000 series meters

    Environment
    ION Enterprise 5.6 SP2

    Resolution
    There are no drivers available for PM5000 series meters on an ION Enterprise 5.6 SP2. The only option is to use the MDI (Modbus Device Importer) tool and create a simple Modbus driver for this device type. It would only allow to read/write Modbus values, and will not have access to onboard logs or events.

    NOTE: The PM5000 series meters are natively supported in StruxureWare Power Monitoring Expert (PME) 7.2.2 and greater. 

    LE (Limited Edition) driver for PM5000 meters on ION Enterprise 6.0 SP1 can be downloaded from the following link:

    http://www.schneider-electric.com/ww/en/download/document/PM5000_Series_LE_V6_DOT_0_DOT_1_ENG

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance