Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where to find PM600 Firmware?

    Product Line


    Please see attached firmware files.

    In order to determine if you need to upgrade the Firmware follow the steps below:

    From the Power Meter display
    1. Press the Mode button until “Diagnostics” is displayed.
    2. Press the Select button to enter the Diagnostics mode. Continue to press the Select button until you reach the “F/W OS Version” screen.
    3. Note the present “F/W OS Version”
    4. Press the Mode button to return to the modes list.
    5. If required, follow the instructions for upgrading your firmware in FA237920.
    NOTE: The different firmware was released for different hardware used for the PM600 series meters.
    If the device firmware is below 12.1 then this device cannot be safely upgraded to 23.102 and must only use the 12.1 version as the highest firware version.
    Therefore if your device is presently:
    <12.1 then download PM_OS_12100.fw
    >12.1 then download PM_OS_23102A.fw

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance