Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    RealFLO is not recognizing newly added flow runs


    An activation code has been used to increase the number of flow runs on a SCADAPack controller (let's say from 2 runs to 4 runs) but I am unable to load a configuration for the new number of flow runs.


    After applying the activation code to the controller, you can verify the options on the controller by selecting Controller > Flow Computer Information

    4 runs now appear to be activated. Now, if you try to install a new configuration with 4 flow runs configured, you could get an error message indicating that only 2 runs are available. Older versions of RealFlo did not give much information when this error occured which could lead to some confusion. RealFlo 6.95.1 will now give you the following error.

    When the flow computer was first loaded to the controller, it looked at the number of enabled flow runs and allocated enough memory to accomadate only that number of flow runs (in this example, 2 flow runs). By replacing/updating the flow computer, RealFlo will look again at the number of currently enabled flow runs (now 4) and allocate enough memory to handle up to 4 flow runs. With the new flow computer installed, you should now be able to laod your configuration with up to 4 flow runs.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance