Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    A320 error on ILE2 integrated motor

    A320 error on ILE2 integrated motor

    Product Line:
    ILE motor

    Possible reasons of the A320 error are:
    1. Higher amount of friction in application that is on this motor - check the mechanical if there is some blockage, check bearing.
    2. Gearbox attached on the motor has higher friction because it lost lubrication
    3. Motors bearings are damaged - wear out.
    4. Tuning of the drive to an application has not been done.
    5. Any change of inertia in the system (higher).
    If simply powering the motor without even sending any run command to it shows error A320, then motor has to be repaired or replaced.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance