Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where can I find basic programming information for ATV drive?

    Issue:
    Where can I find basic programming information for ATV drive?

    Product Line:
    ATV930

    Environment:
    All

    Cause:
    Basic programming.

    Resolution:

    Under drive menu:

    t CC= 2/3 wire control
    CG= Macro con fig
    bF r= Standard motor frequency 60 hz
    nPr= Rated motor power= HP size of the motor
    U nS= Rated motor voltage =  motor voltage
    nCr= Rated motor current= motor amps
    FrS= Rated motor Frequency= 60 hz
    NS= Rated motor speed= motor r pms
    fF r= Max Frequency= Hz
    Itch= Motor Thermal Current= Amps
    ACC= Ramp up time acceleration
    DEC= Ramp down time deceleration
    LP= Low speed setting
    HP=High speed setting

    Command Menu:
    Far= AI 1 for remote pot control
          = AI 2 for analog input 4-20 mA control
          = (See the ATV programming manual for other options)
    CHIC= Not separate or Separate (depends on where start/stop and speed controls are coming from)
    RC= Reference switching.

    Refer to the programming manual for in depth explanation and menu structure.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance