Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why will the ATV320 autotune function not work in NST state?

    ATV320 will not autotune in NST state
    Product Line:   
    Autotune not functioning
    Sometimes, the drive's configuration can prevent an Autotune. 
    For instance, if the drive’s command channel is from a communication network such as Modbus, then a specific command word order must be sent before performing tuning with the keypad.
    1- Power on the drive; ATV320’s state is NST
    2- Write CMD = 6; ATV320’s state is RDY
    3- Write CMD = 7; ATV320’s state is RDY
    4- With the keypad, make “Autotuning” = “Apply Autotuning”; the tune isn’t done
    5- Write CMD = 271; ATV320’s state is RDY
    6- With the keypad, make “Autotuning” = “Apply Autotuning”; the tune is done
    Another possibility is when the drive status is NST.
    For instance, if the drive is set for 3-wire control and DI1 is not active, the status will be NST, and an Autotune is not allowed.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance