in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I configure the date/time on a v3 NetBotz Appliance?

    Issue:
    Process for configuring date/time settings on a v3 NetBotz Appliance.

    Product Line:
    NetBotz v3 (355, 455, 450, 550, & 570)

    Environment:
    NetBotz v3 (all firmware versions)

    Resolution:

    1) Log into the Advanced View application using an Administrator account.

    2) Select the Configuration Tab and then under Appliance Settings select Clock.

    Proceed with setting up Network Time Protocol (NTP) or manually defining the date/time.


    Configuring Date/Time using NTP

    3) Check the Box for Enable NTP.

    4) Define the Primary NTP Server hostname or IP Address you would like to use.
    NOTE: You can add up to three NTP servers.

    5) Select Set time now using NTP to force sync the date and time with the NTP server(s).

    6) Select OK.


    Configuring Date/Time Manually

    NOTE: 
    It is recommended to configure the Date/Time using NTP whenever possible.


    3) Ensure the box is unchecked for Enable NTP is not checked.

    4) Manually define the Date/Time.

    5) Click OK.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance