Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the pin assignment for Lexium 32 motor cable VW3M5101Rxx ?

    Black wire with 1 printed on it should be wired to U  on motor connector of drive
    Black wire with 2 printed on it should wired to V  on motor connector of drive
    Black wire with 3 printed on it should be to W  on motor connector of drive
    Green/Yellow wire is protective ground and it should be wired to PE on motor connector of drive

    Note, the brake release wires are only needed for motors with brake.

    White wire is brake + and should be connected to BR+ (pin A) on brake connector of drive
    Gray wire is brake - and should be connected to BR- (pin B) on brake connector of drive


    See attached images for clarification of connector terminals


    rev 10-23-18

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance