Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I clear the "SLT2" or "SLT3" error on Lexium 32 after removing a module?

    If you remove an option module from Lexium32M and replace it with a module of a different type, or leave the slot empty, the drive will display a "SLT " error to alert that a module that was once present is now missing or has been changed.

    To proceed any further with the drive setup, commissioning or use, you must acknowledge the error message to clear the "SLT" message.
    This can be done via SoMove or via the built-in HMI keypad.  

    To clear the message via the keypad follow these steps.
    1. Press the round navigation button.  The message "save" will appear on the screen.
    2. Again press the round navigation button.  The display will change to ready, or FSU for first setup if other critical parameters need to be set.
    Done.

    To clear the message via SoMove follow these steps.
    1. Connect with SoMove
    2. Click on the "Startup messages tab"
    3. In the left window pane click on the "slot" message then click OK in the popup window the opens 
    Done

    Rev 2/12/18

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance