Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Altivar Process Drive shows "FWUP" on top left corner of the display, how can I clear this?

    Altivar Process Drive shows "FWUP" on top left corner of the display, how can I clear this?

    Product Line:
    Altivar 6xx and 9xx Process Drive (ATV630, ATV930, ATV650, ATV950, ATV660, ATV960, ATV680, ATV980)

    All serial numbers for Altivar 6xx and 9xx Process Drive 



    "FWUP" is not a fault code it is a status of the drive. When the drive is shipped from the factory it is flashed with the latest firmware version. This procedure is 2 step process from the PC to the drive.
    The first step involves uploading the firmware file from a PC to the drive itself. The second process is all done on the drive itself. While the drive is updating the firmware it will display the "FWUP" message on the upper left corner of the drive. This will normally happen until completion of the process and then the message should disappear and show "RDY."
    If the ESC key is depressed after an update is completed this message will stay on the screen.
    To clear follow instructions on the document attached below.
    Before proceeding any further you need to set your Access Level to "Expert Mode."

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance