Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to setup an External Pulse Module to do an Energy Reset for a PM8000

    Reset energy readings on the PM8000 meter is needed but the only way of doing that by default is to use a Master reset. However, a Master reset is not wanted to be performed

    Product Line

    Energy readings reset

    PM8000 doesn't have energy reset functionality from front display or in ION setup data screens by itself. The only option available is a Master reset.

    Follow the procedure or video below to setup an external pulse module that will reset energy values only.
    1. Connect to meter using ION Setup software.
    2. Hold CTRL key on your keyboard and click on your meter. That will open the meter in advanced mode and all ION modules will be displayed.
    3. Navigate to Ext Pulse Modules and insert a new module.
    4. Right click on the newly created module and rename it "Energy Reset"
    5. Double click on the "Energy Reset" Module that was just created and click on the "Output Registers" tab
    6. Edit "xxxx Trigger" and write "Energy reset" in the field and click OK, then click Send.
    1. Navigate to Pulse Merge Modules and double click on "Nrm Egy Reset" module.
    2. Click on edit for one of the Pulse In inputs under inputs tab.
    3. Choose "Energy Reset" parameter under \Ext Pulse module\Energy Reset and click OK, then click Send.

    Now, whenever you send a pulse using the "Energy Reset" Ext Pulse Module, the energy readings on that meter will reset to zeros. See FA306427  for instruction on how to pulse an "Ext pulse module" from ION Setup.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance