Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the part number for a 20A relay?

    The part number for a 20A relay is a L5504RVF20.
    Some of the key features are:
    • 220 - 240 V AC nominal supply voltage
    • 47 - 53 Hz and 57 - 63 Hz frequency range
    • a.c input impedance 50 ohm at 1 kHz A maximum of 10 units may be connected on a single C-Bus Network
    • Electrical Isolation 3.75 kV RMS from C-Bus to mains
    • Maximum Number of Units on a Single C-Bus Network 10
    • Contact Type Voltage free, magnetically latched
    • Switch Operations Greater than 60,000 operations
    • Quiescent Power 4 W
    • Warm-up Time 5 s
    • Restart Delay 0 s - 42 min and 30 s
    • Network Clock and Network Burden Software selectable
    • Remote switch input can be daisy chained to a maximum of 10 units and a maximum of 1000m of cable
    • Mains Terminals accommodates 2 x 1.5 mm² or 1 x 2.5 mm²
    • C-Bus Connections 2 x RJ45 sockets
    • Operating Temperature Range 0 - 45°C
    • Operating Humidity Range 10 - 95% RH
    For further information please visit www.clipsal.com/Trade/Products/ProductDetail?CatNo=L5504RVF20





     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance