Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    M580 SD memory card format procedure

    M580 CPU SD memory card format procedure
    1. Connect to M580 and make sure the Unity project is “Equal”, “Run” and “Built”
    2. Stop the PLC
    3. Open SD card door and make sure LED is ON
    4. Open the “Animation Table” Window
    5. Add system word %SW93.0 and %SW93.1
    6. Turn on the “Modification” button
    7. Enter value “1” for %SW93.0
    8. (This will start the format of the SD card then that value will change back to “0” and the value of %SW93.1 will go from “0” to “1” to indicate the format has completed successfully), (Formatting a standard SD card takes about 30-50 seconds)
    9. When completed enter value of “0” for both %SW93.0 and %SW93.1
    10. Start PLC

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance