Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What are the differences between the MA0185000 and the MA0185100 including revision?


    Below are the differences between the MA0185000 and the MA0185100 including revision:

    MA-0185-000 

    A Product introduction. No revision marking on the tap label. 
    B Redesign to improve return loss. 
    C Redesign to improve the network 75Ω impedance match. This is the lowest recommended revision that should be used. 
    Although it was allowed to mix the –000 revision B and C taps, performance was limited to that allowed by the older B version which did cause communication problems. 
    The –000 part number was obsoleted at this revision. 

    MA-0185-100
    A No design change. Supercedes –000 Model. Logo and color change only. –100 suffix required for documentation purposes. 
    B No design change. Removed “F” connectors from the shipping bag. 
    C No design change. Internal documentation issue that standardized many product descriptions. No stock purge required. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance