in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to Find the CPU Load for an ION8600 Series Meter

    Issue
    How to determine the CPU Load in an ION8600 series meter.

    Product Line
    ION8600 series (the procedure can be applied to other ION meter types as well)

    Environment
    ION Setup will be used to find the CPU load.

    Cause
    ION modules in the template consume CPU power.  In cases were it is desired to add custom frameworks, it is necessary to keep track of the processing power available.  Once the processing power reaches the limit of 100%, it would not be possible to add extra modules.

    Resolution
    While the following video below goes through the procedure, here are the steps:
    1. Using ION Setup connect to the meter (in this example single mode is used to conenct to an Ethernet meter)
    2. Click on Exit to close 'Setup Assistant'.
    3. Select 'No' when prompted to connect to a different device to keep the connection open to the meter.
    4. From the menu, select Tools > Diagnostics.
    5. Select 'General' tab.
    6. Observe 'CPU Loading' parameter.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance