Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    CM3000 and CM4000 How to reset accumulated energy from the ION Setup?

    Issue
    Customer likes to reset the accumulated energy of the meter from ION Setup. Without the suggested modification, one needs to clear it from the front panel only.

    Product Line
    CM3000, CM4000

    Environment
    ION Setup 3.x

    Resolution
    Let's take CM4000 as an example. Please close any open instance of ION Setup.

    1. Please go to the installation directory of the ION Setup, for example, C:\Program Files (x86)\Schneider Electric\ION Setup\tables\CM4000
    2. Open the Setup.cfg in the above location and replace the entire section under [Meter Resets] with the following:
     
    [Meter Resets]
    NotSetupMode=1
    SetupType=7
    SetupNum=2
    StartAddress=48000
    Registers=2
    Setup1=1,Meter Initialization
    Pkt1Format=10030,9999
    Setup2=2,Clear Accumulated Energy
    Pkt2Format=6211

    Save the file. Open ION Setup>Meter Resets.

    The Meter Reset section should look like as follows

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance